Akademik Veri Yönetim Sistemi
PHOTOMEDICINE AND LASER SURGERY, cilt.32, sa.10, ss.533-539, 2014 (SCI-Expanded)
Objective: The aim of this study is to evaluate the effect of Erbium: yttrium-aluminum-garnet (Er:YAG) laser with different pulse lengths on the surface roughness of zirconia ceramic and airborne particle abrasion. Background data: Er:YAG laser treatment is expected to be an alternative surface treatment method for zirconia ceramics; however, the parameters and success of the application are not clear. Methods: One hundred and forty zirconia discs (diameter, 10 mm; thickness, 1.2 mm) were prepared by a computer-aided design and computer-aided manufacturing (CAD/CAM) system according to the manufacturer's instructions. Specimens were divided into 14 groups (n=10). One group was left as polished control, one group was air-particle abraded with Al2O3 particles. For the laser treatment groups, laser irradiation was applied at three different pulse energy levels (100, 200, and 300 mJ) and for each energy level at four different pulse lengths; 50, 100, 300, and 600 mu s. Surface roughness was evaluated with an optical profilometer and specimens were evaluated with scanning electron microscopy (SEM). Results: Data was analyzed with one way ANOVA and Tukey multiple comparison tests (alpha=0.05). For the 100 and 200 mJ laser etching groups, 50 and 100 mu s laser duration resulted in significantly higher surface roughness compared with air-particle abrasion (p<0.05). The difference among R-a values of 300 mu s, 600 mu s, and air-particle abrasion groups were not statistically significant (p>0.05). For the 300 mJ laser etching groups; there was no statistically significant difference among the R-a values of 50 mu s, 100 mu s, 300 mu s, 600 mu s, and air-particle abrasion groups (p>0.05). Conclusions: In order to increase surface roughness and promote better bonding to resin luting agents, Er:YAG laser etching may be an alternative to air-particle abrasion for zirconia ceramics. However, high levels of pulse energy and longer pulse length may have an adverse effect on micromechanical locking properties, because of a decrease in surface roughness